Allied Telesis IE340 Series - show dot1 x

C613-50631-01 Rev A Command Reference for IE340 Series 2194
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
802.1X COMMANDS
SHOW
DOT1X
show dot1x
Overview Use this command to show authentication information for 802.1X port
authentication.
If you specify the optional all parameter then this command also displays all
authentication information for each port available on the switch.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare_Plus” Feature Overview and Configuration Guide.
Syntax
show dot1x [all]
Mode Privileged Exec
Example
awplus# show dot1x all
Parameter Description
all Displays all authentication information for each port available on the
switch.
Table 1: Example output from the show dot1x all command
awplus# show dot1x all
802.1X Port-Based Authentication Enabled
RADIUS server address: 150.87.18.89:1812
Next radius message id: 5
RADIUS client address: not configured
Authentication info for interface port1.0.2
portEnabled: true - portControl: Auto
portStatus: Authorized
reAuthenticate: disabled
reAuthPeriod: 3600
PAE: quietPeriod: 60 - maxReauthReq: 2 - txPeriod: 30
PAE: connectTimeout: 30
BE: suppTimeout: 30 - serverTimeout: 30
CD: adminControlledDirections: in
KT: keyTxEnabled: false
critical: disabled
guestVlan: disabled
dynamicVlanCreation: single-dynamic-vlan
multiVlanSession: disabled
assignFailActionRule: deny
hostMode: multi-supplicant
maxsupplicant: 1024