C613-50631-01 Rev A Command Reference for IE340 Series 2531
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PUBLIC KEY INFRASTRUCTURE AND CRYPTO COMMANDS
SHOW
CRYPTO PKI ENROLLMENT USER
show crypto pki enrollment user
Overview Use this command to display a list of trustpoints for which RADIUS user
enrollments have been performed, using the crypto pki enroll user command.
This indicates that PKCS#12 files for the user are available for export for the given
trustpoints, using the crypto pki export pkcs12 command.
Syntax
crypto pki enrollment user <username>
Mode Privileged Exec
Example To show the list of trustpoints to which user “exampleuser1” is enrolled, use the
following commands:
awplus> enable
awplus(config)# show crypto pki enrollment user exampleuser1
Output Figure 49-3: Example output from show crypto pki enrollment user
Related
commands
crypto pki enroll user
crypto pki export pkcs12
Parameter Description
<username> The user for which enrollments are to be shown.
awplus> enable
awplus# show crypto pki enrollment user exampleuser1
User "exampleuser1" is enrolled to the following trustpoints:
local,example
To Next Page
Loading...
