C613-50631-01 Rev A Command Reference for IE340 Series 2721
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
G.8032 ETHERNET RING PROTECTION SWITCHING COMMANDS
PROFILE
NAME
profile name
Overview Use this command to associate a G.8032 profile instance with this G.8032 Ethernet
Ring Protection (ERP) instance.
Syntax
profile name <erp-profile-name>
Default If this command is not used, a profile with the name “default-profile” will be used
for this G.8032 ERP instance.
Mode G8032 Configure Switch Mode
Usage notes A G.8032 ERP instance uses a profile which contains timer configurations and
configurations for revertive modes of operation. This configuration can be
accepted regardless of the ERP instance being disabled or enabled. Any
parameters from a changed profile will take effect the next time the G.8032 state
machine uses the parameters in the updated profile.
Example To associate a G.8032 profile named “prof_1” with a G.8032 ERP instance named
“blue”, use the following commands:
awplus(config)# g8032 erp-instance blue
awplus(g8032-config-switch)# profile name prof_1
Related
commands
g8032 erp-instance
g8032 profile
show g8032 erp-instance
Command
changes
Version 5.4.7-0.1: command added
Version 5.4.7-1.1: added to x310 series products
Version 5.4.7-2.1: added to x550 series products
Version 5.4.8-0.2: added to SBx8100 series products
Version 5.4.8-1.1: added to SBx908 GEN2 series products
Parameter Description
<erp-profile-name> The name of the G.8032 profile
To Next Page
Loading...
Need help?
General
