Allied Telesis IE340 Series - show acl-group ip address

C613-50631-01 Rev A Command Reference for IE340 Series 1999
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
IPV4 HARDWARE ACCESS CONTROL LIST (ACL) COMMANDS
SHOW
ACL-GROUP IP ADDRESS
show acl-group ip address
Overview Use this command to show the hosts and subnets in a named IPv4 ACL group.
Syntax
show acl-group ip address <group>
Mode Privileged Exec
Example To show all hosts and subnets in an IPv4 ACL group IPV4_GROUP1, use the
command:
awplus# show acl-group ip address IPV4_GROUP1
Output Figure 38-3: Example output from show acl-group ip address IPV4_GROUP1
Related
commands
acl-group ip address
ip (ip-host-group)
Command
changes
Version 5.5.0-1.1: command added
Parameter Description
<group> The name of the IPv4 ACL group.
awplus#show acl-group ip address IPV4_GROUP1
Host Group: IPV4_GROUP1

192.168.1.2/32
192.168.2.5/32
10.0.0.0/8