Allied Telesis IE340 Series - show debugging igmp

C613-50631-01 Rev A Command Reference for IE340 Series 1696
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
IGMP AND IGMP SNOOPING COMMANDS
SHOW
DEBUGGING IGMP
show debugging igmp
Overview Use this command to see what debugging is turned on for IGMP.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show debugging igmp
Mode User Exec and Privileged Exec
Example To display the IGMP debugging options set, enter the command:
awplus# show debugging igmp
Output Figure 32-2: Example output from the show debugging igmp command
Related
commands
debug igmp
Command
changes
Version 5.4.7-1.1: VRF-lite support added SBx8100.
Version 5.4.8-1.1: VRF-lite support added x930, SBx908 GEN2.
IGMP Debugging status:
IGMP Decoder debugging is on
IGMP Encoder debugging is on
IGMP Events debugging is on
IGMP FSM debugging is on
IGMP Tree-Info-Base (TIB) debugging is on