C613-50631-01 Rev A Command Reference for IE340 Series 414
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
LOGGING COMMANDS
DEFAULT
LOG EXTERNAL
default log external
Overview Use this command to restore the default settings for the external log. By default,
the size of the external log is 50 kB, it rotates through 1 additional file, and it
accepts messages with a severity level of notices and above.
Note that this command does not clear the configured filename for the external
log.
Syntax
default log external
Mode Global Configuration
Example To restore the default settings for the external log, use the commands:
awplus# configure terminal
awplus(config)# default log external
Related
commands
clear log external
log external
log external (filter)
log external exclude
log external rotate
log external size
show log config
show log external
unmount
Command
changes
Version 5.4.7-1.1: command added
To Next Page
Loading...
Need help?
General
