C613-50631-01 Rev A Command Reference for IE340 Series 1820
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-SM COMMANDS
IP
PIM SPARSE-MODE JOIN-PRUNE-BATCHING
ip pim sparse-mode join-prune-batching
Overview Use this command to enable batching of Join and Prune messages in PIM-SM. This
functionality reduces the number of PIM packets that must be sent to maintain a
large number of groups
Use the no variant of this command to disable batching of Join and Prune
messages in PIM-SM.
Syntax
ip pim sparse-mode join-prune-batching
no ip pim sparse-mode join-prune-batching
Default Disabled.
Mode Global Configuration
Examples To enable Join/Prune batching for PIM-SM, use the commands:
awplus# configure terminal
awplus(config)# ip pim sparse-mode join-prune-batching
To disable Join/Prune batching for PIM-SM, use the commands:
awplus# configure terminal
awplus(config)# no ip pim sparse-mode join-prune-batching
Related
commands
ip pim sparse-mode wrong-vif-suppression
Command
changes
Version 5.4.8-2.3: command added.
To Next Page
Loading...
Need help?
General
