Allied Telesis IE340 Series - clear line vty

C613-50631-01 Rev A Command Reference for IE340 Series 205
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
USER ACCESS COMMANDS
CLEAR
LINE VTY
clear line vty
Overview This command resets a VTY line. If a session exists on the line then it is closed.
Syntax
clear line vty <0-32>
Mode Privileged Exec
Example To reset the first VTY line, use the command:
awplus# clear line vty 1
Related
commands
privilege level
line
show telnet
show users
Parameter Description
<0-32> Line number