Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 2952
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
SHOW
ATMF BACKUP
show atmf backup
Overview This command displays information about AMF backup status for all the nodes in
an AMF network. It can only be run on AMF master and controller nodes.
Syntax
show atmf backup
show atmf backup logs
show atmf backup server-status
show atmf backup synchronize [logs]
Mode Privileged Exec
Example 1 To display the AMF backup information, use the command:
node_1# show atmf backup
To display log messages to do with backups, use the command:
node_1# show atmf backup logs
Parameter Description
logs Displays detailed log information.
server-status Displays connectivity diagnostics information for each
configured remote file server.
synchronize Display the file server synchronization status
logs For each remote file server, display the logs for the last
synchronization
Table 57-4: Output from show atmf backup
Node_1# show atmf backup
ScheduledBackup ......Enabled
Schedule............1 per day starting at 03:00
Next Backup Time....04 May 2019 03:00
Backup Bandwidth .....Unlimited 
Backup Media..........SD (Total 1974.0 MB, Free197.6MB)
Current Action........Starting manual backup
Started...............04 May 2019 10:08
CurrentNode...........atmf_testbox1 
Backup Redundancy ....Enabled 
Local media ........SD (Total 3788.0MB, Free 3679.5MB) 
State ..............Active

Node Name Date Time In ATMF On Media Status
--------------------------------------------------------------------------------
atmf_testbox1 04 May 2019 09:58:59 Yes Yes In Progress
atmf_testbox2 04 May 2019 10:01:23 Yes Yes Good

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English