Allied Telesis IE340 Series - Page 2953

C613-50631-01 Rev A Command Reference for IE340 Series 2953
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
SHOW
ATMF BACKUP
Example 2 To display the AMF backup synchronization status, use the command:
node_1# show atmf backup synchronize
To display log messages to do with synchronization of backups, use the command:
node_1# show atmf backup synchronize logs
Example 3 To display the AMF backup information with the optional parameter
server-status, use the command:
Node_1# show atmf backup server-status
Table 57-5: Output from show atmf backup logs
Node_1#show atmf backup logs

Backup Redundancy ..... Enabled
Local media ......... SD (Total 3788.0MB, Free 1792.8MB)
State ............... Inactive (Remote file server is not available)

Log File Location: card:/atmf/ATMF/logs/rsync_<node name>.log

Node 
Name Log Details 
--------------------------------------------------------------------------------
atmf_testbox 
2019/05/04 18:16:51 [9045] receiving file list 
2019/05/04 18:16:51 [9047] .d..t.... flash/ 
2019/05/04 18:16:52 [9047] >f+++++++ flash/a.rel
Table 57-6: Output from show atmf backup synchronize
Node_1#show atmf backup synchronize

ATMF backup synchronization:

* = Active file server 

Id Date Time Status
------------------------------------------------------------------
1 04 May 2016 22:25:57 Synchronized 
* 2 - - Active
Table 57-7: Output from show atmf backup synchronize logs
Node_1#show atmf backup synchronize logs

Id Log Details
-------------------------------------------------------------------------------- 
1 2019/05/04 22:25:54 [8039] receiving file list 
2019/05/04 22:25:54 [8039] >f..t.... backup_Box1.info 
2019/05/04 22:25:54 [8039] sent 46 bytes received 39 bytes total size 40