Allied Telesis IE340 Series - show g8032 erp-instance

C613-50631-01 Rev A Command Reference for IE340 Series 2727
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
G.8032 ETHERNET RING PROTECTION SWITCHING COMMANDS
SHOW
G8032 ERP-INSTANCE
show g8032 erp-instance
Overview Use this command to show one or all G.8032 Ethernet Ring Protection (ERP)
instance(s) configuration and dynamic state data.
Syntax
show g8032 erp-instance {<erp-instance-name>|all}
Mode User Exec and Privileged Exec
Example To show the configuration and dynamic state data for an ERP instance named
“blue”, use the following command:
awplus# show g8032 erp-instance blue
Output Figure 55-3: Example output from the show g8032 erp-instance command.
Parameter Description
<erp-instance-name> The name of a specific G.8032 ERP instance.
all Use this to show all instances.
awplus#show g8032 erp-instance blue
------------------------------------------------------------------
Instance Name : blue
Admin State : enabled
G.8032 State : IDLE
Failure of Proto-TO : false
Phy Ring : R1 - East (port2.0.25) : West (sa1)
East Link : Link_Unblocked
West Link : Link_blocked
RPL Role East Link : NONE
RPL Role West Link : OWNER
CFM MEP East : -
CFM MEP West : -
ERP Profile : default-profile
Level : 0
Ring-ID : 1
RAPS-Channel VLAN : 900
Sub-ring : disabled
Virtual Channel : disabled
Data Traffic VLANs : 910,920,930,940
TCN To Inst : -
TCN Flush Event : G8032
Wait-To-Restore : -
Wait-To-Block : -
NodeID : 0000.cd37.0c25
SNMP Traps : enabled