C613-50631-01 Rev A Command Reference for IE340 Series 1355
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
BGP AND BGP4+ COMMANDS
BGP
UPDATE-DELAY
bgp update-delay
Overview Use this command to specify the update-delay value for a graceful-restart capable
router.
Use the no variant of this command to revert to the default update-delay value.
Syntax
bgp update-delay <1-3600>
no bgp update-delay [<1-3600>]
Default The default update-delay value is 120 seconds.
Mode Router Configuration
Usage The update-delay value is the maximum time a graceful-restart capable router
which is restarting will defer route-selection and advertisements to all its
graceful-restart capable neighbors. This maximum time starts from the instance
the first neighbor attains established state after restart. The restarting router
prematurely terminates this timer when end-of-rib markers are received from all its
graceful-restart capable neighbors.
Example
awplus# configure terminal
awplus(config)# router bgp 10
awplus(config-router)# bgp update-delay 345
Command
changes
Added to AlliedWare Plus prior to 5.4.6-1
Version 5.4.7-2.1: BGP support added for x510 and x550 series
Version 5.4.7-2.4: BGP support added for IE300 series
Parameter Description
<1-3600> Delay value in seconds.
To Next Page
Loading...
Need help?
General
