Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 1752
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
MULTICAST COMMANDS
DEBUG
NSM
debug nsm
Overview This command specifies a set of debug options for use by Allied Telesis authorized
service personnel only.
Use the no variant of this command to remove debug options.
Syntax
debug nsm [all|events|ha|kernel]
no debug nsm [all|events|ha|kernel]
Mode Global Configuration, Privileged Exec
Usage notes This command is intended for use by Allied Telesis authorized service personnel
for diagnostic purposes.
Related
commands
show debugging nsm mcast
Command
changes
Version 5.4.7-2.1 command added.
Parameter Description
all Enables all the nsm debugging options
events Enables the nsm events debugging options
ha Enables the nsm high availability debugging options
kernel Enables the nsm kernel debugging options

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English