Allied Telesis IE340 Series - show rmon history

C613-50631-01 Rev A Command Reference for IE340 Series 3298
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
RMON COMMANDS
SHOW
RMON HISTORY
show rmon history
Overview Use this command to display the parameters specified on all the currently defined
RMON history collections on the device.
Syntax
show rmon history
Mode User Exec and Privileged Exec
Output Figure 65-2: Example output from the show rmon history command
NOTE: The following etherStats counters are not currently available for Layer 3
interfaces:
• etherStatsBroadcastPkts
• etherStatsCRCAlignErrors
• etherStatsUndersizePkts
•etherStatsOversizePkts
• etherStatsFragments
• etherStatsJabbers
• etherStatsCollisions
• etherStatsPkts64Octets
• etherStatsPkts65to127Octets
• etherStatsPkts128to255Octets
• etherStatsPkts256to511Octets
• etherStatsPkts512to1023Octets
• etherStatsPkts1024to1518Octets
awplus#sh rmon history
history index = 56
data source ifindex = 4501
buckets requested = 34
buckets granted = 34
Interval = 2000
Owner Andrew

history index = 458
data source ifindex = 5004
buckets requested = 400
buckets granted = 400
Interval = 1500
Owner trev
========================================================