Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 2582
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
DHCP SNOOPING COMMANDS
SHOW
ARP SECURITY
show arp security
Overview Use this command to display ARP security configuration.
Syntax
show arp security
Mode User Exec and Privileged Exec
Example To display ARP security configuration on the switch use the command:
awplus# show arp security
Related
commands
arp security
show arp security interface
show arp security statistics
Table 1: Example output from the show arp security command
awplus# show arp security

ARP Security Information:
Total VLANs enabled ............. 2
Total VLANs disabled ............ 11
vlan1 .............. Disabled
vlan2 .............. Disabled
vlan3 .............. Disabled
vlan4 .............. Disabled
vlan5 .............. Disabled
vlan100 ............ Disabled
vlan101 ............ Disabled
vlan102 ............ Disabled
vlan103 ............ Disabled
vlan104 ............ Disabled
vlan105 ............ Enabled
vlan1000 ........... Disabled
vlan1001 ........... Enabled
Table 2: Parameters in the output from the show arp security command
Parameter Description
Total VLANs enabled The number of VLANs that have ARP security enabled.
Total VLANs disabled The number of VLANs that have ARP security disabled.

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English