Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 1827
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-SM COMMANDS
SHOW
DEBUGGING PIM SPARSE-MODE
show debugging pim sparse-mode
Overview This command displays the status of the debugging of the system.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show debugging pim sparse-mode
Mode User Exec and Privileged Exec
Example To display PIM-SM debugging settings, use the command:
awplus# show debugging pim sparse-mode
Figure 35-4: Output from show debugging pim sparse-mode
Related
commands
debug pim sparse-mode
Command
changes
Version 5.4.7-1.1: VRF-lite support added SBx8100.
Version 5.4.8-1.1: VRF-lite support added x930, SBx908 GEN2.
Debugging status:
PIM event debugging is on
PIM Hello THT timer debugging is on
PIM event debugging is on
PIM MFC debugging is on
PIM state debugging is on
PIM packet debugging is on
PIM incoming packet debugging is on
PIM outgoing packet debugging is on

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English