C613-50631-01 Rev A Command Reference for IE340 Series 2817
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
ATMF
BACKUP STOP
atmf backup stop
Overview Running this command stops a backup that is currently running on the master
node you are logged onto. Note that if you have two masters and want to stop
both, then you can either run this command separately on each master node, or
add both masters to a working set, and issue this command to the working set.
Note that this command can only be run on a master node.
Syntax
atmf backup stop
Mode Privileged Exec
Usage notes This command is used to halt an AMF backup that is in progress. In this situation
the backup process will finish on its current node and then stop.
Example To stop a backup that is currently executing on master node node-1, use the
following command:
AMF_Master_1# amf backup stop
Related
commands
atmf backup
atmf backup enable
atmf backup now
show atmf backup
To Next Page
Loading...
Need help?
General
