Allied Telesis IE340 Series - epsr configuration

C613-50631-01 Rev A Command Reference for IE340 Series 2674
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
ETHERNET PROTECTION SWITCHED RING (EPSRING™) COMMANDS
EPSR
CONFIGURATION
epsr configuration
Overview Use this command to enter EPSR Configuration mode so that EPSR can be
configured.
Syntax
epsr configuration
Mode Global Configuration
Example To change to EPSR mode, use the command:
awplus(config)# epsr configuration
Related
commands
epsr mode master controlvlan primary port
epsr
show epsr