Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 1217
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OSPFV3 FOR IPV6 COMMANDS
AREA
ENCRYPTION IPSEC SPI ESP
area encryption ipsec spi esp
Overview Use this command in Router Configuration mode to enable either AES-CBC
(Advanced Encryption Standard-Cipher Block Chaining) or 3DES (Triple Data
Encryption Standard) ESP (Encapsulating Security Payload) encryption for a
specified OSPF area.
Use the no variant of this command in Router Configuration mode to disable the
encryption configured for a specified OSPF area.
Syntax
area <area-id> encryption ipsec spi <256-4294967295> esp
{aes-cbc <AES-CBC-key>|3des <3DES-key>|null}{md5
<MD5-key>|sha1 <SHA1-key>}
no area <area-id> encryption ipsec spi <256-4294967295>
Mode Router Configuration
Parameter Description
<area-id> The OSPF area that you are specifying the summary route default-
cost for. This can be entered in either dotted decimal format or
normal decimal format. Use one of the following formats:
<ip-addr> OSPF area-ID expressed in IPv4 address
format A.B.C.D.
<0-4294967295> OSPF area-ID expressed as a decimal number
within the range shown.
For example, the values 0.0.1.2 and decimal 258 would both define
the same area-ID.
<256-
4294967295>
Specify an SPI (Security Parameters Index) value in the range 256 to
4294967295, entered as a decimal integer.
esp Specify the esp keyword (Encapsulating Security Payload) to then
apply either AES-CBC or 3DES encryption.
aes-cbc Specify this keyword to enable AES-CBC (Advanced Encryption
Standard-Cipher Block Chaining) encryption.
<AES-CBC-
key>
Enter an AES-CBC key containing either 32, 48, or 64 hexadecimal
characters.
3des Specify 3DES (Triple Data Encryption Standard) encryption.
<3DES-key> Enter a 3DES key containing 48 hexadecimal characters.
null Specify ESP without AES-CBC or 3DES encryption applied.
md5 Specify the MD5 (Message-Digest 5) encryption algorithm.
<MD5-key> Enter an MD5 key containing 32 hexadecimal characters.
sha1 Specify the SHA-1 (Secure Hash Algorithm 1) encryption algorithm.
<SHA1-key> Enter an SHA-1 key containing 40 hexadecimal characters.

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English