Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 1276
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OSPFV3 FOR IPV6 COMMANDS
SHOW
IPV6 OSPF DATABASE GRACE
show ipv6 ospf database grace
Overview Use this command in User Exec or Privileged Exec modes to display information
about the grace LSAs.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ipv6 ospf database grace <adv-router-id>
[self-originate|adv-router <adv-router-id>]
Mode User Exec and Privileged Exec
Examples To display information about the grace LSAs, use the following command:
awplus# show ipv6 ospf database grace adv-router 10.10.10.1
Output Figure 29-5: Example output from the show ipv6 ospf database grace
command
Parameter Description
<adv-router-id> The Advertising Router ID
(usually entered in IPv4 address format A.B.C.D).
Note that this ID component no longer represents an address; it
is simply a character string that has an IPv4 address format.
adv-router Displays all the LSAs of the specified router.
self-originate Self-originated link states.
LS age: 1087
LS Type: AS-External-LSA
Link State ID: 0.0.0.13
Advertising Router: 0.0.1.1
LS Seq Number: 0x8000000C
Checksum: 0xCE9D
Length: 52
Metric Type: 2 (Larger than any link state path)
Metric: 20
Prefix: 2010:2222::/64
Prefix Options: 0 (-|-|-|-)
Forwarding Address: 2003:1111::1 

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English