C613-50631-01 Rev A Command Reference for IE340 Series 1234
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OSPFV3 FOR IPV6 COMMANDS
DEBUG
IPV6 OSPF EVENTS
debug ipv6 ospf events
Overview This command enables IPv6 OSPF debugging for event troubleshooting.
To enable all debugging options, specify debug ipv6 ospf event with no
additional parameters.
The no and undebug variants of this command disable OSPF debugging. Using
this command with no parameters entered, will disable debugging for all
parameter options.
Syntax
debug ipv6 ospf events [abr] [asbr] [os][router] [vlink]
no debug ipv6 ospf events [abr] [asbr] [os] [router] [vlink]
Mode Privileged Exec and Global Configuration
Example To enable IPv6 event debugging and show ABR events, use the following
command:
awplus# debug ipv6 ospf events asbr
Parameter Description
abr Shows ABR events.
asbr Shows ASBR events.
router Shows other router events.
os Shows OS events.
vlink Shows virtual link events.
To Next Page
Loading...
Need help?
General
