C613-50631-01 Rev A Command Reference for IE340 Series 2865
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
ATMF
SECURE-MODE CERTIFICATE RENEW
atmf secure-mode certificate renew
Overview Use this command to force all local certificates to expire and be renewed on an
AMF secure mode network.
Secure mode certificates renew automatically but this command could be used to
renew a certificate in a situation where the automatic renewal may happen while
the device is not attached to the AMF network.
Syntax
atmf secure-mode certificate renew
Mode Privileged Exec
Example To renew a local certificate on a AMF member or AMF master, use the command:
awplus# atmf secure-mode certificate renew
Related
commands
show atmf secure-mode certificates
show atmf secure-mode statistics
Command
changes
Version 5.4.7-0.3: command added
To Next Page
Loading...
Need help?
General
