Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 2761
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
MEDIA REDUNDANCY PROTOCOL (MRP) COMMANDS
SHOW
DEBUGGING MRP
show debugging mrp
Overview Use this command to show which debug options are enabled for MRP logging.
Syntax
show debugging mrp
Mode User Exec
Example To show the enabled MRP debugging options, use the command:
awplus# show debugging mrp
Output Figure 56-4: Example output from show debugging mrp
Related
commands
debug mrp
mrp ring
Command
changes
Version 5.5.0-2.1: command added
awplus#show debugging mrp
MRP debugging status:
MRP Port debugging: On
MRP FSM debugging: Off
MRP FDB debugging: Off
Table 56-2: Parameters in the output from show debugging mrp
Parameter Description
MRP Port debugging Debug output for MRP port events.
MRP FSM debugging Debug output for MRP state machine events.
MRP FDB debugging Debug output for MRP forwarding database events.

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English