Allied Telesis IE340 Series - ip pim ignore-rp-set-priority

C613-50631-01 Rev A Command Reference for IE340 Series 1807
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-SM COMMANDS
IP
PIM IGNORE-RP-SET-PRIORITY
ip pim ignore-rp-set-priority
Overview Use this command to ignore the RP-SET priority value, and use only the hashing
mechanism for RP selection.
This command is used to inter-operate with older Cisco IOS versions.
Use the no variant of this command to disable this setting.
Syntax
ip pim ignore-rp-set-priority
no ip pim ignore-rp-set-priority
Mode Global Configuration
Example
awplus# configure terminal
awplus(config)# ip pim ignore-rp-set-priority