C613-50631-01 Rev A Command Reference for IE340 Series 3366
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
TRIGGER COMMANDS
DAY
day
Overview This command specifies the days or date that the trigger can activate on. You can
specify one of:
• A specific date
• A specific day of the week
• A list of days of the week
• A day of any month of any year
• A day of a specific month in any year
•Every day
By default, the trigger can activate on any day.
Syntax
day every-day
day <1-31>
day <1-31> <month>
day <1-31> <month> <year>
day <weekday>
Default every-day, so by default, the trigger can activate on any day.
Mode Trigger Configuration
Usage notes For example trigger configurations that use the day command, see “Restrict
Internet Access” and “Turn off Power to Port LEDs” in the Triggers Feature
Overview and Configuration Guide.
Parameter Description
every-day Sets the trigger so that it can activate on any day.
<1-31> Day of the month the trigger is permitted to activate on.
<month> Sets the month that the trigger is permitted to activate on. Valid
keywords are: january, february, march, april, may, june, july,
august, september, october, november, and december.
<year> Sets the year that the trigger is permitted to activate in, between
2000 and 2035.
<weekday> Sets the days of the week that the trigger can activate on. You can
specify one or more week days in a space separated list. Valid
keywords are: monday, tuesday, wednesday, thursday, friday,
saturday, and sunday.
To Next Page
Loading...
Need help?
General
