Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 311
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
REBOOT HISTORY
show reboot history
Overview Use this command to display the device’s reboot history.
Syntax
show reboot history
Mode User Exec and Privileged Exec
Example To show the reboot history, use the command:
awplus# show reboot history
Output Figure 7-16: Example output from the show reboot history command
Related
commands
show continuous-reboot-prevention
show tech-support
awplus#show reboot history

<date> <time> <type> <description>
-----------------------------------------------
2016-10-10 01:42:04 Expected User Request
2016-10-10 01:35:31 Expected User Request
2016-10-10 01:16:25 Unexpected Rebooting due to critical process (network/nsm) 
failure!
2016-10-10 01:11:04 Unexpected Rebooting due to critical process (network/nsm) 
failure!
2016-10-09 19:56:16 Expected User Request
2016-10-09 19:51:20 Expected User Request
Table 6: Parameters in the output from the show reboot history command
Parameter Description
Unexpected A non-intended reboot.
The reboot is counted by the continuous reboot
prevention feature, as long as the reboot occurred in the
time period specified for continuous reboot prevention.
Expected A planned or user-triggered reboot.
The reboot is not counted by the continuous reboot
prevention feature.
Continuous reboot
prevention
A continuous reboot prevention event has occurred. The
action taken is configured with the continuous-reboot-
prevention command. The next time period during which
reboot events are counted begins from this event.
User request User initiated reboot via the CLI.

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English