C613-50631-01 Rev A Command Reference for IE340 Series 2468
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
LOCAL RADIUS SERVER COMMANDS
COPY
FDB-RADIUS-USERS (TO FILE)
copy fdb-radius-users (to file)
Overview Use this command to create a set of local RADIUS server users from MAC addresses
in the local FDB. A local RADIUS server user created using this command can be
used for MAC authentication.
Syntax
copy fdb-radius-users
{local-radius-user-db|nvs|flash|usb|debug|tftp|scp|ď€
fserver|<url>} [interface <port>] [vlan <vid>] [group <name>]
[export-vlan [<radius-group-name>]]
Mode Privileged Exec
Usage notes The local RADIUS server users created are written to a specified destination file in
local RADIUS user CSV (Comma Separated Values) format. The local RADIUS server
users can then be imported to a local RADIUS server using the copy
local-radius-user-db (from file) command.
Parameter Description
local-radius-
user-db
Copy the local RADIUS server users created to the local
RADIUS server.
nvs Copy the local RADIUS server users created to NVS memory.
flash Copy the local RADIUS server users created to Flash memory.
usb Copy the local RADIUS server users created to USB storage
device.
debug Copy the local RADIUS server users created to debug.
tftp Copy the local RADIUS server users created to the TFTP
destination.
scp Copy the local RADIUS server users created to the SCP
destination.
fserver Copy the local RADIUS server users created to the remote file
server.
<url> Copy the local RADIUS server users created to the specified
URL.
interface <port> Copy only MAC addresses learned on a specified device port.
Wildcards may be used when specifying an interface name.
vlan <vid> Copy only MAC addresses learned on a specified VLAN.
group <name> Assign a group name to the local RADIUS server users created.
export-vlan Export VLAN ID assigned to exported FDB entry.
<radius-group-
name>
Prefix for Radius group name storing VLAN ID
To Next Page
Loading...
Need help?
General
