Allied Telesis IE340 Series - show rmon event

C613-50631-01 Rev A Command Reference for IE340 Series 3296
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
RMON COMMANDS
SHOW
RMON EVENT
show rmon event
Overview Use this command to display the events configured for the RMON probe.
Syntax
show rmon event
Mode User Exec and Privileged Exec
Output Figure 65-1: Example output from the show rmon event command
NOTE: The following etherStats counters are not currently available for Layer 3
interfaces:
• etherStatsBroadcastPkts
• etherStatsCRCAlignErrors
• etherStatsUndersizePkts
•etherStatsOversizePkts
• etherStatsFragments
• etherStatsJabbers
• etherStatsCollisions
• etherStatsPkts64Octets
• etherStatsPkts65to127Octets
• etherStatsPkts128to255Octets
• etherStatsPkts256to511Octets
• etherStatsPkts512to1023Octets
• etherStatsPkts1024to1518Octets
Example To display the events configured for the RMON probe, use this command:
awplus# show rmon event
awplus#sh rmon event
event Index = 787
Description TRAP
Event type log & trap
Event community name gopher
Last Time Sent = 0
Owner RMON_SNMP

event Index = 990
Description TRAP
Event type trap
Event community name teabo
Last Time Sent = 0
Owner RMON_SNMP