Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 848
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
GVRP COMMANDS
SHOW
DEBUGGING GVRP
show debugging gvrp
Overview Use this command to see what debugging is turned on for GVRP.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show debugging gvrp
Mode User Exec and Privileged Exec
Example Enter the following commands to display GVRP debugging output on the console:
awplus# configure terminal
awplus(config)# debug gvrp all
awplus(config)# exit
awplus# show debugging gvrp
Output See sample output from the show debugging gvrp command after entering
debug gvrp all:
Related
commands
debug gvrp
GVRP debugging status:
GVRP Event debugging is on
GVRP CLI debugging is on
GVRP Timer debugging is on
GVRP Packet debugging is on

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English