C613-50631-01 Rev A Command Reference for IE340 Series 3317
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SECURE SHELL (SSH) COMMANDS
DEBUG
SSH SERVER
debug ssh server
Overview This command enables the SSH server debugging facility. When enabled, the SSH
server sends diagnostic messages to the system log. To display the debugging
messages on the terminal, use the terminal monitor command.
The no variant of this command disables the SSH server debugging facility. This
stops the SSH server from generating diagnostic debugging messages.
Syntax
debug ssh server [brief|full]
no debug ssh server
Default SSH server debugging is disabled by default.
Mode Privileged Exec and Global Configuration
Examples To start SSH server debugging, use the command:
awplus# debug ssh server
To start SSH server debugging with extended output, use the command:
awplus# debug ssh server full
To disable SSH server debugging, use the command:
awplus# no debug ssh server
Related
commands
debug ssh client
show ssh server
undebug ssh server
Parameter Description
brief Enables brief debug mode.
full Enables full debug mode.
To Next Page
Loading...
Need help?
General
