Allied Telesis IE340 Series - QoS Commands; Introduction

42
C613-50631-01 Rev A Command Reference for IE340 Series 2107
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
QoS Commands
Introduction
Overview This chapter provides an alphabetical reference for Quality of Service commands.
QoS uses ACLs. For more information about ACLs, see the ACL Feature Overview
and Configuration Guide.
Command List •“class” on page 2109
•“class-map” on page 2110
•“clear mls qos interface policer-counters” on page 2111
•“clear mls qos interface queue-counters” on page 2112
•“default-action” on page 2113
•“description (QoS policy-map)” on page 2114
•“egress-rate-limit” on page 2115
•“egress-rate-limit overhead” on page 2117
•“match access-group” on page 2118
•“match cos” on page 2120
•“match dscp” on page 2121
•“match eth-format protocol” on page 2122
•“match inner-cos” on page 2125
•“match inner-vlan” on page 2126
•“match ip-precedence” on page 2127
•“match mac-type” on page 2128
•“match tcp-flags” on page 2129
•“match vlan” on page 2130
•“mls qos cos” on page 2131