Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 2821
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
ATMF
CONTAINER LOGIN
atmf container login
Overview Use this command to login to an AMF container on a Virtual AMF Appliance (VAA).
An AMF container is an isolated instance of AlliedWare Plus with its own network
interfaces, configuration, and file system. The features available inside an AMF
container are a sub-set of the features available on the host VAA. These features
enable the AMF container to function as a uniquely identifiable AMF master and
allows for multiple tenants (up to 60) to run on a single VAA host. See the
AMF Feature Overview and Configuration Guide for more information on running
multiple tenants on a single VAA host.
Syntax
atmf container login <container-name>
Mode Privileged Exec
Usage notes If you try to login to a AMF container that has not been created, or is not running,
you will see the following message:
% Container does not exist or is not running.
To exit from a container and return to the host VAA press <Ctrl+a q>.
Example To login to container “vac-wlg-1”, use the command:
awplus# atmf container login vac-wlg-1
You will then be presented with a login screen for that container:
Related
commands
atmf container
show atmf container
Command
changes
Version 5.4.7-0.1: command added
Parameter Description
<container-name> The name of the AMF container you wish to login into.
Connected to tty 1 
Type <Ctrl+a q> to exit the console, <Ctrl+a Ctrl+a> to enter Ctrl+a itself 

vac-wlg-1 login: manager 
Password: friend 

AlliedWare Plus (TM) 5.4.7 02/03/17 08:46:12 

vac-wlg-1>

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English