C613-50631-01 Rev A Command Reference for IE340 Series 2910
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
ERASE
FACTORY-DEFAULT
erase factory-default
Overview This command erases all data from NVS and all data from flash except the
following:
• the boot release file (a .rel file) and its release setting file
• all license files
• the latest GUI release file
The device is then rebooted and returned to its factory default condition. The
device can then be used for AMF automatic node recovery.
Syntax
erase factory-default
Mode Privileged Exec
Usage notes This command is an alias to the atmf cleanup command.
Example To erase data, use the command:
Node_1# erase factory-default
This command will erase all NVS, all flash contents except for
the boot release, a GUI resource file, and any license files,
and then reboot the switch. Continue? (y/n):y
Related
commands
atmf cleanup
To Next Page
Loading...
Need help?
General
