C613-50631-01 Rev A Command Reference for IE340 Series 1552
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
BGP AND BGP4+ COMMANDS
SHOW
BGP IPV6 ROUTE-MAP (BGP4+ ONLY)
show bgp ipv6 route-map (BGP4+ only)
Overview Use this command to display BGP4+ routes that match the specified route-map
within an IPv6 environment. Use the show ip bgp route-map (BGP only) command
to display BGP routes that match the specified route-map within an IPv4
environment.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show bgp ipv6 route-map <route-map>
Mode User Exec and Privileged Exec
Example To show routes that match the route-map myRouteMap, use the command:
awplus# show bgp ipv6 route-map myRouteMap
Related
commands
show ip bgp route-map (BGP only)
Command
changes
Added to AlliedWare Plus prior to 5.4.6-1
Version 5.4.7-2.1: BGP support added for x510 and x550 series
Version 5.4.7-2.4: BGP support added for IE300 series
Parameter Description
<route-map> Specifies a route-map that is matched.
To Next Page
Loading...
Need help?
General
