C613-50631-01 Rev A Command Reference for IE340 Series 1790
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-SM COMMANDS
CLEAR
IP MROUTE PIM SPARSE-MODE
clear ip mroute pim sparse-mode
Overview Use this command to clear all multicast route table entries learned through
PIM-SM for a specified multicast group address, and optionally a specified
multicast source address.
Syntax
clear ip mroute <Group-IP-address> pim sparse-mode
clear ip mroute <Group-IP-address> <Source-IP-address> pim
sparse-mode
Mode Privileged Exec
Example
awplus# clear ip mroute pim sparse-mode 224.0.0.0
awplus# clear ip mroute 192.168.7.1 pim sparse-mode 224.0.0.0
Command
changes
Version 5.4.7-1.1: VRF-lite support added SBx8100.
Version 5.4.8-1.1: VRF-lite support added x930, SBx908 GEN2.
Parameter Description
<Group-IP-address> Specify a multicast group IPv6 address, entered in the
form A.B.C.D.
<Source-IP-address> Specify a source group IP address, entered in the form
A.B.C.D.
To Next Page
Loading...
Need help?
General
