Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 2671
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
ETHERNET PROTECTION SWITCHED RING (EPSRING™) COMMANDS
DEBUG
EPSR
debug epsr
Overview This command enables EPSR debugging.
The no variant of this command disables EPSR debugging.
Syntax
debug epsr {info|msg|pkt|state|timer|all}
no debug epsr {info|msg|pkt|state|timer|all}
Mode Privileged Exec and Global Configuration
Examples To enable state transition debugging, use the command:
awplus# debug epsr state
To disable EPSR packet debugging, use the command:
awplus# no debug epsr pkt
Related
commands
undebug epsr
Parameter Description
info Send general EPSR information to the console.
Using this parameter with the no debug epsr command will explicitly
exclude the above information from being sent to the console.
msg Send the decoded received and transmitted EPSR packets to the console.
Using this parameter with the no debug epsr command will explicitly
exclude the above packets from being sent to the console.
pkt Send the received and transmitted EPSR packets as raw ASCII text to the
console.
Using this parameter with the no debug epsr command will explicitly
exclude the above packets from being sent to the console.
state Send EPSR state transitions to the console.
Using this parameter with the no debug epsr command will explicitly
exclude state transitions from being sent to the console.
timer Send EPSR timer information to the console.
Using this parameter with the no debug epsr command will explicitly
exclude timer information from being sent to the console.
all Send all EPSR debugging information to the console.
Using this parameter with the no debug epsr command will explicitly
exclude any debugging information from being sent to the console.

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English