C613-50631-01 Rev A Command Reference for IE340 Series 2773
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
APPLICATION
-PROXY IP-FILTER
application-proxy ip-filter
Overview Use this command to enable global IP filtering on a device. Once enabled the
device will add a global ACL in response to a threat message from an AMF Security
(AMF-Sec) Controller.
Use the no variant of this command to disable global IP filtering.
Syntax
application-proxy ip-filter
no application-proxy ip-filter
Default Global IP filtering is disabled by default.
Mode Global Configuration
Usage notes For this feature to work, the AMF Application Proxy service needs to be enabled on
your network, using the command service atmf-application-proxy.
Example To enable global IP filtering, use the commands:
awplus# configure terminal
awplus(config)# application-proxy ip-filter
To disable global IP filtering, use the commands:
awplus# configure terminal
awplus(config)# no application-proxy ip-filter
Related
commands
application-proxy redirect-url
application-proxy threat-protection
clear application-proxy threat-protection
service atmf-application-proxy
show application-proxy threat-protection
Command
changes
Version 5.4.7-2.5: command added
To Next Page
Loading...
Need help?
General
