C613-50631-01 Rev A Command Reference for IE340 Series 3397
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
TRIGGER COMMANDS
TYPE
PERIODIC
type periodic
Overview This command configures a trigger to be activated at regular intervals. The time
period between activations is specified in minutes.
Syntax
type periodic <1-1440>
Mode Trigger Configuration
Usage notes A combined limit of 10 triggers of the type periodic and time can be configured. If
you attempt to add more than 10 triggers the following error message is displayed:
For an example trigger configuration that uses the type periodic command, see
“See Daily Statistics” in the Triggers_Feature Overview and Configuration Guide.
Example To configure trigger 44 to activate periodically at 10 minute intervals use the
following commands:
awplus# configure terminal
awplus(config)# trigger 44
awplus(config-trigger)# type periodic 10
Related
commands
show trigger
trigger
Parameter Description
<1-1440> The number of minutes between activations.
% Cannot configure more than 10 triggers with the type time or
periodic
To Next Page
Loading...
