Allied Telesis IE340 Series - show ipv6 pim sparse-mode rp mapping

C613-50631-01 Rev A Command Reference for IE340 Series 1900
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-SMV6 COMMANDS
SHOW
IPV6 PIM SPARSE-MODE RP MAPPING
show ipv6 pim sparse-mode rp mapping
Overview Use this command to show group-to-RP (Rendezvous Point) mappings, and the RP
set.
For information on filtering and saving command output, see the “Getting_Started
with AlliedWare Plus” Feature Overview and Configuration_Guide.
Syntax
show ipv6 pim sparse-mode rp mapping
Mode User Exec and Privileged Exec
Example
awplus# show ipv6 pim sparse-mode rp mapping
Figure 36-15: Output from the show ipv6 pim sparse-mode rp mapping
command
Related
commands
show ipv6 pim sparse-mode rp-hash
awplus#show ipv6 pim sparse-mode rp mapping
PIM Group-to-RP Mappings
Group(s): ff00::/8
RP: 3ffe:10:10:5::153
Info source: 3ffe:10:10:5::153, via bootstrap, priority 192
Uptime: 05:36:40