C613-50631-01 Rev A Command Reference for IE340 Series 147
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
FILE AND CONFIGURATION MANAGEMENT COMMANDS
BOOT
SYSTEM BACKUP
boot system backup
Overview Use this command to set a backup release file to load if the main release file cannot
be loaded.
Use the no variant of this command to stop specifying a backup release file.
Syntax
boot system backup <filepath-filename>
no boot system backup
Mode Global Configuration
Examples To specify the file IE340-5.5.2-2.1.rel as the backup to the main release file, use the
commands:
awplus# configure terminal
awplus(config)# boot system backup flash:/IE340-5.5.2-2.1.rel
To stop specifying a backup to the main release file, use the commands:
awplus# configure terminal
awplus(config)# no boot system backup
Related
commands
boot config-file
boot config-file backup
boot system
show boot
Parameter Description
<filepath-filename> Filepath and name of a backup release file.
Backup release files must be in the Flash filesystem.
Valid release files must have a . rel extension.
backup The specified file is a backup release file.
To Next Page
Loading...
Need help?
General
