C613-50631-01 Rev A Command Reference for IE340 Series 1101
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
RIPNG FOR IPV6 COMMANDS
UNDEBUG
IPV6 RIP
undebug ipv6 rip
Overview Use this command to disable debugging options of RIPng events, RIPng packets,
and communication between RIPng and NSM processes.
Syntax
undebug ipv6 rip [all|events|nsm|packet [recv|send][detail]]
Mode Privileged Exec and Global Configuration
Example To disable debugging options, use the following command:
awplus# undebug ipv6 rip events
awplus# undebug ipv6 rip all
awplus# undebug ipv6 rip packet send
awplus# undebug ipv6 rip packet recv detail
Related
commands
debug ipv6 rip
Parameter Description
all Disables all RIPng debugging.
events Disable the display of RIPng events information.
nsm Disable the display of RIPng and NSM communication.
packet Disable debugging of specified RIPng packets only.
recv Disable the display of information for received packets.
send Disable the display of information for sent packets.
detail Disable the display of detailed information for sent or received
packets.
To Next Page
Loading...
Need help?
General
