15
C613-50631-01 Rev A Command Reference for IE340 Series 559
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Switching
Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
switching.
For more information, see the Switching Feature Overview and Configuration
Guide.
Command List •“backpressure” on page 561
•“clear loop-protection action” on page 563
•“clear loop-protection counters” on page 564
•“clear mac address-table dynamic” on page 565
•“clear mac address-table static” on page 567
•“clear port counter” on page 568
•“clear port-security intrusion” on page 569
•“debug loopprot” on page 571
•“debug platform packet” on page 572
•“duplex” on page 574
•“flowcontrol (switch port)” on page 575
•“linkflap action” on page 577
•“loop-protection loop-detect” on page 578
•“loop-protection action” on page 580
•“loop-protection action-delay-time” on page 581
•“loop-protection timeout” on page 582
•“mac address-table acquire” on page 583
•“mac address-table ageing-time” on page 584
To Next Page
Loading...
Need help?
General
