C613-50631-01 Rev A Command Reference for IE340 Series 2707
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
G.8032 ETHERNET RING PROTECTION SWITCHING COMMANDS
DEBUG
G8032
debug g8032
Overview Use this command to enable G.8032 debugging.
Use the no variant of this command to disable G.8032 debugging.
Syntax
debug g8032 {all|event|rx|tx}
no debug g8032 {all|event|rx|tx}
Mode Privileged Exec
Example To enable all G.8032 debugging, use the following command:
awplus# debug g8032 all
Related
commands
show debugging
show debugging g8032
undebug g8032
Command
changes
Version 5.4.7-0.1: command added
Version 5.4.7-1.1: added to x310 series products
Version 5.4.7-2.1: added to x550 series products
Version 5.4.8-0.2: added to SBx8100 series products
Version 5.4.8-1.1: added to SBx908 GEN2 series products
Parameter Description
all Turn on all G.8032 debugging
event Turn on G.8032 Event debugging
rx Turn on G.8032 Receive debugging
tx Turn on G.8032 Transmit debugging
To Next Page
Loading...
Need help?
General
