C613-50631-01 Rev A Command Reference for IE340 Series 2624
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OPENFLOW COMMANDS
SHOW
OPENFLOW SSL
show openflow ssl
Overview Use this command to display the current SSL configuration for OpenFlow.
Syntax
show openflow ssl
Mode Privileged Exec
Usage notes This command displays the current SSL configuration for OpenFlow.
Example To display the current SSL configuration for OpenFlow, use the command:
awplus# show openflow ssl
Output Figure 52-5: Example output from show openflow ssl
Related
commands
openflow ssl trustpoint
openflow controller
openflow ssl peer certificate
Command
changes
Version 5.4.7-1.1: command added
Version 5.4.7-2.1: command added to IE300, IE500 series products
Version 5.4.8-0.2: added to SBx908 GEN2
Version 5.4.8-1.1: added to IE210L series products
awplus#show openflow sslď€
Private key: /flash/.certs/pki/local/cakey.pemď€
Certificate: /flash/.certs/pki/local/cacert.pemď€
CA Certificate: /etc/openvswitch/cacert.pemď€
Bootstrap: true
To Next Page
Loading...
Need help?
General
