Allied Telesis IE340 Series - show banner login

C613-50631-01 Rev A Command Reference for IE340 Series 3320
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SECURE SHELL (SSH) COMMANDS
SHOW
BANNER LOGIN
show banner login
Overview This command displays the banner message configured on the device. The banner
message is displayed to the remote user before user authentication starts.
Syntax
show banner login
Mode User Exec, Privileged Exec, Global Configuration, Interface Configuration, Line
Configuration
Example To display the current login banner message, use the command:
awplus# show banner login
Related
commands
banner login (SSH)