C613-50631-01 Rev A Command Reference for IE340 Series 1577
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
BGP AND BGP4+ COMMANDS
SHOW
IP BGP NEIGHBORS NOTIFICATION (BGP ONLY)
show ip bgp neighbors notification (BGP
only)
Overview Use this command to display the number of notification messages sent to the
neighbor from the peer throughout the session.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip bgp neighbors <ipv4-addr> notification
Mode User Exec and Privileged Exec
Example
awplus# show ip bgp neighbors 10.11.4.26 notification
Command
changes
Added to AlliedWare Plus prior to 5.4.6-1
Version 5.4.7-2.1: BGP support added for x510 and x550 series
Version 5.4.7-2.4: BGP support added for IE300 series
Parameter Description
<ipv4-addr> The IPv4 address of an IPv4 BGP neighbor, in dotted decimal
notation A.B.C.D.
To Next Page
Loading...
Need help?
General
