44
C613-50631-01 Rev A Command Reference for IE340 Series 2208
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Authentication
Commands
Introduction
Overview Port authentication commands enable you to specify three different types of
device authentication: 802.1X authentication, web authentication, and MAC
authentication.
• 802.1X is an IEEE standard providing a mechanism for authenticating devices
attached to a LAN port or wireless device.
• Web authentication is applicable to devices that have a human user who
opens the web browser and types in a user name and password when
requested.
• MAC authentication is used to authenticate devices that have neither a
human user nor implement 802.1X supplicant when making a network
connection request.
This chapter provides an alphabetical reference for MAC and web authentication
commands. For a list of 802.1X commands see the 802.1X Commands chapter.
For more information on configuring and using port authentication, see the AAA
and Port Authentication Feature Overview and Configuration Guide.
Command List •“auth auth-fail vlan” on page 2212
•“auth critical” on page 2214
•“auth dhcp-framed-ip-lease” on page 2215
•“auth dynamic-vlan-creation” on page 2217
•“auth guest-vlan” on page 2220
•“auth guest-vlan forward” on page 2222
•“auth guest-vlan hw-forwarding” on page 2224
•“auth host-mode” on page 2225
•“auth log” on page 2227
•“auth max-supplicant” on page 2229
To Next Page
Loading...
Need help?
General
