C613-50631-01 Rev A Command Reference for IE340 Series 1713
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
MLD AND MLD SNOOPING COMMANDS
CLEAR
IPV6 MLD GROUP
clear ipv6 mld group
Overview Use this command to clear MLD specific local-membership(s) on all interfaces, for
a particular group.
Syntax
clear ipv6 mld group {*|<ipv6-address>}
Mode Privileged Exec
Usage This command applies to interfaces configured for MLD Layer 3 multicast
protocols and learned by MLD Snooping.
Example To clear all groups on all interfaces, use the command:
awplus# clear ipv6 mld group *
Related
commands
clear ipv6 mld
clear ipv6 mld interface
Parameter Description
* Clears all groups on all interfaces. This is an alias to the clear
ipv6 mld command.
<ipv6-address> Specify the group address for which MLD local-memberships
are to be cleared from all interfaces.
Specify the IPv6 multicast group address in the format in the
format X:X::X:X.
To Next Page
Loading...
Need help?
General
