C613-50631-01 Rev A Command Reference for IE340 Series 2726
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
G.8032 ETHERNET RING PROTECTION SWITCHING COMMANDS
SHOW
DEBUGGING G8032
show debugging g8032
Overview Use this command to show the debugging modes enabled for G.8032.
Syntax
show debugging g8032
Mode User Exec and Privileged Exec
Example To show the debugging modes enabled for G.8032, use the following command:
awplus# show debugging g8032
Output Figure 55-2: Example output from the show debugging g8032 command.
Related
commands
debug g8032
undebug g8032
Command
changes
Version 5.4.7-0.1: command added
Version 5.4.7-1.1: added to x310 series products
Version 5.4.7-2.1: added to x550 series products
Version 5.4.8-0.2: added to SBx8100 series products
Version 5.4.8-1.1: added to SBx908 GEN2 series products
awplus#show debugging g8032ď€
G.8032 event debugging is offď€
G.8032 receive debugging is offď€
G.8032 transmit debugging is off
To Next Page
Loading...
Need help?
General
