To Next Page

To Previous Page

C613-50631-01 Rev A Command Reference for IE340 Series 3003

AlliedWare Plus™ Operating System - Version 5.5.3-0.x

AMF AND AMF PLUS COMMANDS

SHOW

ATMF SECURE-MODE CERTIFICATES

show atmf secure-mode certificates

Overview Use this command to display the certificate status details when secure mode is

enabled on an AMF network.

Syntax

show atmf secure-mode certificates [detail] [area <area-name>]

[node <node-name>]

Mode Privileged Exec

Example To display AMF secure mode certificates on a master or member node, use the

command:

awplus# show atmf secure-mode certificates

To display detailed information about AMF secure mode certificates for a node

named “area_2_node_1” in an area named “area-2”, use the command:

awplus# show atmf secure-mode certificates detail area area-2

node area_2_node_1

Output Figure 57-37: Example output from show atmf secure-mode certificates

Parameter Description

detail Display detailed certificate information.

area Specify an AMF area.

<area-name> The AMF area you want to see the certificate information for.

node Specify an AMF node.

<node-name> The AMF node you want to see information for.

Area-1 Certificates:

Node Name Signer Expires Status

------------------------------------------------------------------------------

area_1_node_1 master_1 11 Mar 2017 

master_2 4 Mar 2017 Active

area_1_node_2 master_1 11 Mar 2017 

master_2 4 Mar 2017 Revoked



Area-2 Certificates:

Node Name Signer Expires Status

------------------------------------------------------------------------------

area_2_node_1 master_1 18 Mar 2017 Active

area_2_node_2 master_1 18 Mar 2017 Rejected

Allied Telesis IE340 Series User Manual

Other manuals for Allied Telesis IE340 Series